装备通服务热线
400-8778-258
武汉克亿迪设备仪器有限公司
普通会员
信息已核实
供应产品
美国TruPulse图柏斯200全新款图柏斯TP200原装激光测距仪
  • 产品型号:TruPulse200/TP200
  • 所属商家:武汉克亿迪设备仪器有限公司
  • 商家类型:
  • 联系方式:13545864806
  • 查看更多同类产品>>
推荐您优先选择特种装备网依照《网络商品交易及有关服务行为管理暂行办法》审核认证的装备通VIP会员!
详细信息

美国TruPulse图柏斯200***图柏斯TP200原装激光测距仪


美国图柏斯TruPulse(图帕斯)200代理 

                        



     

1. Point to point linear distance in SD mode


(oblique distance) cross light wire aims directly at the measured object, press fire key


2. VD mode vertical height: (relative height) that is: single point height, eyepiece internal cross filament directly aimed at the highest point of the measured object, suitable for measuring the relative height of suspended objects (such as overhead cable)


3. HD mode horizontal distance cross filament aims at the object to be measured, and the built-in tilt compensator will automatically compensate the angle to calculate the horizontal distance from the object to be measured


4. The absolute height of HT mode is three-point fixed height, and the cross filament inside the eyepiece aims at the object directly


Measurement sequence: aim at the middle of the measured area and measure the HD horizontal distance first


Aim at the top of the object and press fire


Aim at the bottom of the object and press fire


It is suitable for measuring the absolute height of building entities, such as building height, tree height and tower height;


5. Inc mode tilt angle


(pitch angle) the cross light filament aims directly at the object to be measured, and press the fire key







  


技术参数:

数据通信:串行,通过有线RS232(标准)和无线蓝牙

测量范围:距离:0~1000m(一般目标),0~2000m(反射性目标)

              倾角:±90°

***度:距离:±0.2m(一般目标)±0.2m~1米(微小和灰暗目标)

          倾角:±0.25°

测量模式:水平距离、垂直距离、斜距和倾斜角(或***比斜率)

              灵活的三点高差测量程序(可自动排序)

              垂直向空间两点测跨距程序

目标模式:标准、近距、远距、连续和过滤(要求使用反射器和树叶过滤器)模式

电源:额定3.0伏直流电

电池类型:CRV3或AA

电池使用时间:AA:约75,000次测量(蓝牙启用,60,000次)

CRV3:约150,000次测量(蓝牙启用,120,000次)

20小时连续使用

视力安全:FDA一级(Class1)(CFR21)

环境:防撞、防水和防尘(NEMA3,IP54)

温度:-4°F到+140°F(-20℃到+60℃)

光学放大倍数:7x(视野:100米@915米处)

显示器:观测器内液晶LCD显示器

单位:英尺、码、米和度

脚架:标准相机脚架安装孔1/4"~20母螺纹

产品尺寸:120x50x90mm

产品重量:285g



交易风险提示:风险防范建议:
该单位注册信息未经特种装备网审核认证,信息内容仅供买家参考,其真实性、准确性和合法性由发布单位自行提供并负责,特种装备网对此不承担任何责任。
为保障您的利益,规避交易风险,请买家对该单位所发布信息的真实性予以充分核实,同时推荐您优先选择特种装备网依照《网络商品交易及有关服务行为管理暂行办法》和《杭州市网络交易管理暂行办法》规定审核认证的装备通VIP会员!

 广告服务| 会员服务| 免责声明| 媒体报道| 装备通专区| 杂志刊例
技术支持:特种装备网